|
|
|
The TR-7100 is an automatic, optical Inspection
System for recognising component and solder faults prior
and after the Reflow-Solder Process. The patented illumination
process with approx. 1000 programmable RGB Light Diodes
ensures a constant and problem-free illumination of
the PC-Board.
The pictures are continually captured during the flying
over („Read-on-Fly”). Other than the commonly
used Stop-and-Go process, this results in a smooth movement
during the picture capturing. This, on the one hand,
leads to very short testing times and, on the other
hand, to a drastically reduced breakdown rate, due to
less mechanical stress.
|
| |
| Further
features are: |
 |
›
In- or Offline Operation
› 5 Cameras:
1 from above, 4 from the side
› Resolution:
33 µm (20 µm optional)
› Recording Rate:
300 FOV/s (1 FOV (Field of View) = 17.7 mm x 13.4 mm)
› Inspection
Rate: > 32 qcm /s
› Program generation
from the CAD-Data, the component assembly data or using
a sample PCB
› Testing Area:
50mm x 75 mm to 500 mm x 400 mm
› PCB-Thickness:
0.3 mm to 5 mm
› Maximum clearance
run-through height: 65 mm (above and below)
› Programmable
Rotation Angle
› Separate Picture
Processing and Movement Controlling
› High level
of Service friendliness |
| |
| Options:
|
|
›
Offline Programming Station
› Graphical Repair
Station
› BCR-Integration
|
|
|
|
| |
|
|
| Automated
Process Control for a continuous improvement of the Production
Processes |
| |
|
The TR-7100EP is designed on the basis of the
proven technology of the TR-7100 architecture and, with
its enhanced software-tools and algorithms, offers automated
and therefore reduced program development time, the
highest level of test coverage and the greatest throughput.
As part of the automated process control, the TR-7100EP
offers a proven way to continually optimize your production
processes in the direction of zero-fault production.
|
| |
| Further
features are: |
|
›
In- or Offline Operation
› 5 Cameras:
1 from above, 4 from the side
› Resolution:
33 µm (16 µm, 20 µm and 25 µm
optional)
› Recording Rate:
300 FOV/s (1 FOV (Field of View) = 17.7 mm x 13.4 mm)
› Inspection
Rate: > 32 qcm /s
› Program generation
from the CAD-Data, the component assembly data or using
a sample PCB
› Testing Area:
50mm x 75 mm to 500 mm x 400 mm
› PCB-Thickness:
0.3 mm to 5 mm
› Maximum clearance
run-through height: 65 mm (above and below)
› Programmable
Rotation Angle
› Separate Picture
Processing and Movement Controlling
› Coloured picture
display of the PCB
› Individual
Illumination Patterns are fully programmable and can be
stored for re-use
› High level
of Service friendliness |
| |
| Options: |
|
›
Offline Programming Station
› Graphical Repair
Station
› BCR-Integration
|
|
|
|
| |
|
|
|
